Design of a Digital Temperature-Controlled Fan Based on a Microcontroller
DOI:
https://doi.org/10.54097/31tdpr25Keywords:
Microcontroller, Automatic control, Temperature sensorAbstract
The 21st century is an era of rapid scientific and technological development, and this progress has continuously improved people's living standards. In a society where daily life is becoming increasingly intelligent, intelligent devices of all kinds keep emerging. In this paper, a digital temperature-controlled fan is designed and implemented on the basis of a microcontroller unit (MCU). The hardware system is divided into six modules: the MCU control module, the keyboard control module, the temperature display module, the temperature sensing module, the motor control module, and the alarm module. The hardware circuit diagrams of these modules are presented, and the soldering of the corresponding hardware circuits is completed. Furthermore, the MCU control program is developed and burned into the microcontroller, and the corresponding functions are realized. The proposed design features a simple structure as well as a certain degree of intelligence and human orientation.
Downloads
References
[1] Sun, Y., Zheng, J., Fu, W., Li, H., & Chen, X. (2024). Design of an intelligent temperature-controlled fan based on STM32. In Sixth International Conference on Information Science, Electrical, and Automation Engineering (ISEAE 2024). SPIE. https://doi.org/10.1117/12.3037595
[2] Deutsches Institut für Normung. (2015). Workplace atmospheres – Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours – Part 3: Performance requirements for apparatus used for general gas detection (DIN EN 45544-3). Beuth Verlag.
[3] Asociación Española de Normalización y Certificación. (2015). Workplace atmospheres – Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours – Part 3: Performance requirements for apparatus used for general gas detection (UNE-EN 45544-3:2015). AENOR.
[4] Comité Européen de Normalisation. (2015). Workplace atmospheres – Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours – Part 3: Performance requirements for apparatus used for general gas detection (EN 45544-3:2015). CEN.
[5] Standards, S. (n.d.). Workplace atmospheres – Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours – Part 1: General requirements and test methods. [Retrieved October 22, 2026].
[6] British Standards Institution. (2015). Workplace atmospheres – Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours – Performance requirements for apparatus used for general gas detection (BS EN 45544-3:2015). BSI.
[7] Semenko, N., Kuchyn, I., Frank, M., & Kovalchuk, O. (2024). Sevoflurane reduces the cardiac toxicity of bupivacaine compared with propofol in rabbits: An experimental study using early electrocardiographic detection and measurement of toxic plasma concentration. Anaesthesiology Intensive Therapy, 56(4), 245-253. https://doi.org/10.5114/ait.2024.145167
[8] Wang, S. Y., Jin, Y., Tan, A. L., & Li, M. (2024). Quantitative detection of cell concentration of ichthyotoxic red tide algae based on three dimensional fluorescence spectrometry and particle swarm optimization partial least squares support vector machine. SSRN. https://doi.org/10.2139/ssrn.5047174
[9] Klinger, B., & Mei-Ratliff, Y. (2008). CHED 205—Comparison of separation/preconcentration methods for toxic metal ion speciation with ICP-OES detection. Abstracts of Papers of the American Chemical Society, 235, 1.
[10] Carrie, M., Thomas, R., & Smith, J. (2010). Evaluation of an electronic nose with sample preconcentration for the detection of toxic industrial chemicals. Journal of Process Analytical Chemistry.
[11] Kawano, T. (2014). Use of swimming cells of green paramecia for detection of toxic rare earth ions at lethal and sub-lethal concentration. In International Conference on Advanced Material and Manufacturing Science. https://doi.org/10.4028/www.scientific.net/AMR.875-877.2229
[12] Allouch, A., Guglielmino, M., & Roux, S. (2018). Optofluidic fluorescence cell for the detection of low concentration toxic gases. Sensors and Actuators B: Chemical, 255(Pt. 3), 3441-3446. https://doi.org/10.1016/j.snb.2017.09.174
[13] Banerjee, S. (2014). Maximum tolerance concentration detection of microorganisms capable of bioremediating toxic heavy metals from the ash dyke of thermal power plants.
[14] Kawano, T. (2014). Use of swimming cells of green paramecia for detection of toxic rare earth ions at lethal and sub-lethal concentration. Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/AMR.875-877.2229
[15] Yang, Q. W., Huang, S. C., Yang, Q. H., & Wang, L. (1995). Toxic detection on root-tip cells of plant after treatment with high concentration zinc. Acta Agriculturae Boreali-Sinica, (2), 62-66. https://doi.org/10.3321/j.issn:1000-7091.1995.02.012
[16] Wan, H., Xu, Q., Gu, P., & Li, Y. (2020). AIE-based fluorescent sensors for low concentration toxic ion detection in water. Journal of Hazardous Materials, 403, Article 123656. https://doi.org/10.1016/j.jhazmat.2020.123656
[17] Barua, N., Menges, L. K., Winter, W. T., & Müller, M. (2025). On-chip preconcentration and infrared detection of toxic gases using a nanoporous waveguide. Journal of Near Infrared Spectroscopy, 33(3-4), 54-63. https://doi.org/10.1177/09670335251360793
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Computer Life
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
